5.3. Directories in /proc/

Common groups of information concerning the kernel are grouped into directories and subdirectories within the /proc/ directory.

5.3.1. Process Directories

Every /proc/ directory contains a number of directories with numerical names. A listing of them may begins like this:

dr-xr-xr-x    3 root     root            0 Feb 13 01:28 1
dr-xr-xr-x    3 root     root            0 Feb 13 01:28 1010
dr-xr-xr-x    3 xfs      xfs             0 Feb 13 01:28 1087
dr-xr-xr-x    3 daemon   daemon          0 Feb 13 01:28 1123
dr-xr-xr-x    3 root     root            0 Feb 13 01:28 11307
dr-xr-xr-x    3 apache   apache          0 Feb 13 01:28 13660
dr-xr-xr-x    3 rpc      rpc             0 Feb 13 01:28 637
dr-xr-xr-x    3 rpcuser  rpcuser         0 Feb 13 01:28 666

These directories are called process directories, as they are named after a program's process ID and contain information specific to that process. The owner and group of each process directory is set to the user running the process. When the process is terminated, its /proc/ process directory vanishes.

Each process directory contains the following files: /proc/self/

The /proc/self/ directory is a link to the currently running process. This allows a process to look at itself without having to know its process ID.

Within a shell environment, a listing of the /proc/self/ directory produces the same contents as listing the process directory for that process.

5.3.2. /proc/bus/

This directory contains information specific to the various buses available on the system. So, for example, on a standard system containing ISA, PCI, and USB busses, current data on each of these buses is available in its directory under /proc/bus/.

The contents of the subdirectories and files available varies greatly on the precise configuration of the system. However, each of the directories for each of the bus types has at least one directory for each bus of that type. These individual bus directories, usually signified with numbers, such as 00, contain binary files that refer to the various devices available on that bus.

So, for example, a system with a USB bus but no USB devices connected to it has a /proc/bus/usb/ directory containing several files:

total 0
dr-xr-xr-x    1 root     root            0 May  3 16:25 001
-r--r--r--    1 root     root            0 May  3 16:25 devices
-r--r--r--    1 root     root            0 May  3 16:25 drivers

The /proc/bus/usb/ directory contains files that track the various devices on any USB buses, as well as the drivers required to use them. The /proc/bus/usb/001/ directory contains all devices on the first USB bus. By looking at the contents of the devices file, one can identify the USB root hub on the motherboard:

T:  Bus=01 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#=  1 Spd=12  MxCh= 2
B:  Alloc=  0/900 us ( 0%), #Int=  0, #Iso=  0
D:  Ver= 1.00 Cls=09(hub  ) Sub=00 Prot=00 MxPS= 8 #Cfgs=  1
P:  Vendor=0000 ProdID=0000 Rev= 0.00
S:  Product=USB UHCI Root Hub
S:  SerialNumber=d400
C:* #Ifs= 1 Cfg#= 1 Atr=40 MxPwr=  0mA
I:  If#= 0 Alt= 0 #EPs= 1 Cls=09(hub  ) Sub=00 Prot=00 Driver=hub
E:  Ad=81(I) Atr=03(Int.) MxPS=   8 Ivl=255ms

5.3.3. /proc/driver/

This directory contains information for specific drivers in use by the kernel.

A common file found here is rtc, which provides output from the driver for the system's Real Time Clock (RTC), the device that keeps the time while the system is switched off. Sample output from /proc/driver/rtc looks like this:

rtc_time	: 01:38:43
rtc_date	: 1998-02-13
rtc_epoch	: 1900
alarm		: 00:00:00
DST_enable	: no
BCD		: yes
24hr		: yes
square_wave	: no
alarm_IRQ	: no
update_IRQ	: no
periodic_IRQ	: no
periodic_freq	: 1024
batt_status	: okay

For more information about the RTC, review /usr/src/linux-2.4/Documentation/rtc.txt.

5.3.4. /proc/fs

This directory shows which file systems are exported. If running an NFS server, typing cat /proc/fs/nfs/exports will display the file systems being shared and the permissions granted for those file systems. For more on sharing file system with NFS, see Chapter 9 Network File System (NFS).

5.3.5. /proc/ide/

This directory holds information about IDE devices on the system. Each IDE channel is represented as a separate directory, such as /proc/ide/ide0 and /proc/ide/ide1. In addition, a drivers file is also available, providing the version number of the various drivers used on the IDE channels:

ide-cdrom version 4.59
ide-floppy version 0.97
ide-disk version 1.10

Many chipsets also provide an informational file in this directory that gives additional data concerning the drives connected through the channels. For example, a generic Intel PIIX4 Ultra 33 chipset produces a /proc/ide/piix that will tell you whether DMA or UDMA is enabled for the devices on the IDE channels:

                              Intel PIIX4 Ultra 33 Chipset.
------------- Primary Channel ---------------- Secondary Channel -------------
                 enabled                          enabled
------------- drive0 --------- drive1 -------- drive0 ---------- drive1 ------
DMA enabled:    yes              no              yes               no 
UDMA enabled:   yes              no              no                no 
UDMA enabled:   2                X               X                 X

Navigating into the directory for an IDE channel, such as ide0, provides additional information. The channel file provides the channel number, while the model tells you the bus type for the channel (such as pci). The Device Directory

Within each IDE channel directory is a device directory. The name of the device directory corresponds to the drive letter in the /dev/ directory. For instance, the first IDE drive on ide0 would be hda.


There is a symbolic link to each of these device directories in the /proc/ide/ directory.

Each device directory contains a collection of information and statistics. The contents of these directories vary according to the type of device connected. Some of the more useful files common to many devices include:

  • cache — The device cache.

  • capacity — The capacity of the device, in 512 byte blocks.

  • driver — The driver and version used to control the device.

  • geometry — The physical and logical geometry of the device.

  • media — The type of device, such as a disk.

  • model — The model name or number of the device.

  • settings — A collection of current parameters of the device. This file usually contains quite a bit of useful, technical information. A sample settings file for a standard IDE hard disk looks similar to this:

    name                value          min          max          mode
    ----                -----          ---          ---          ----
    bios_cyl            784            0            65535        rw
    bios_head           255            0            255          rw
    bios_sect           63             0            63           rw
    breada_readahead    4              0            127          rw
    bswap               0              0            1            r
    current_speed       66             0            69           rw
    file_readahead      0              0            2097151      rw
    ide_scsi            0              0            1            rw
    init_speed          66             0            69           rw
    io_32bit            0              0            3            rw
    keepsettings        0              0            1            rw
    lun                 0              0            7            rw
    max_kb_per_request  64             1            127          rw
    multcount           8              0            8            rw
    nice1               1              0            1            rw
    nowerr              0              0            1            rw
    number              0              0            3            rw
    pio_mode            write-only     0            255          w
    slow                0              0            1            rw
    unmaskirq           0              0            1            rw
    using_dma           1              0            1            rw

5.3.6. /proc/irq/

This directory is used to set IRQ to CPU affinity, which allows the system to connect a particular IRQ to only one CPU. Alternatively, it can exclude a CPU from handling any IRQs.

Each IRQ has its own directory, allowing for the individual configuration of each IRQ. The /proc/irq/prof_cpu_mask file is a bitmask that contains the default values for the smp_affinity file in the IRQ directory. The values in smp_affinity specify which CPUs handle that particular IRQ.

For more information about the /proc/irq/ directory, consult:

5.3.7. /proc/net/

This directory provides a comprehensive look at various networking parameters and statistics. Each of the files covers a specific range of information related to networking on the system. Below is a partial listing of these virtual files:

5.3.8. /proc/scsi/

This directory is analogous to the /proc/ide/ directory, however, it is only for connected SCSI devices.

The primary file in this directory is /proc/scsi/scsi, which contains a list of every recognized SCSI device. From this listing, the type of device, as well as the model name, vendor, SCSI channel and ID data is available.

For example, if a system contains a SCSI CD-ROM, a tape drive, a hard drive, and a RAID controller, this file would look similar to this:

Attached devices: 
Host: scsi1 Channel: 00 Id: 05 Lun: 00
  Vendor: NEC      Model: CD-ROM DRIVE:466 Rev: 1.06
  Type:   CD-ROM                           ANSI SCSI revision: 02
Host: scsi1 Channel: 00 Id: 06 Lun: 00
  Vendor: ARCHIVE  Model: Python 04106-XXX Rev: 7350
  Type:   Sequential-Access                ANSI SCSI revision: 02
Host: scsi2 Channel: 00 Id: 06 Lun: 00
  Vendor: DELL     Model: 1x6 U2W SCSI BP  Rev: 5.35
  Type:   Processor                        ANSI SCSI revision: 02
Host: scsi2 Channel: 02 Id: 00 Lun: 00
  Vendor: MegaRAID Model: LD0 RAID5 34556R Rev: 1.01
  Type:   Direct-Access                    ANSI SCSI revision: 02

Each SCSI driver used by the system has its own directory in /proc/scsi/, which contains files specific to each SCSI controller using that driver. So, for the example system just addressed, aic7xxx and megaraid directories are present, as those two drivers are being utilized. The files in each of the directories typically contain an I/O address range, IRQ information, and statistics for the particular SCSI controller using that driver. Each controller can report a different type and amount of information. The Adaptec AIC-7880 Ultra SCSI host adapter's file in this example system produces the following output:

Adaptec AIC7xxx driver version: 5.1.20/3.2.4
Compile Options:
  TCQ Enabled By Default : Disabled
  AIC7XXX_PROC_STATS     : Enabled

Adapter Configuration:
           SCSI Adapter: Adaptec AIC-7880 Ultra SCSI host adapter
                           Ultra Narrow Controller
    PCI MMAPed I/O Base: 0xfcffe000
 Adapter SEEPROM Config: SEEPROM found and used.
      Adaptec SCSI BIOS: Enabled
                    IRQ: 30
                   SCBs: Active 0, Max Active 1,
                         Allocated 15, HW 16, Page 255
             Interrupts: 33726
      BIOS Control Word: 0x18a6
   Adapter Control Word: 0x1c5f
   Extended Translation: Enabled
Disconnect Enable Flags: 0x00ff
     Ultra Enable Flags: 0x0020
 Tag Queue Enable Flags: 0x0000
Ordered Queue Tag Flags: 0x0000
Default Tag Queue Depth: 8
    Tagged Queue By Device array for aic7xxx host instance 1:
    Actual queue depth per device for aic7xxx host instance 1:


  Device using Narrow/Sync transfers at 20.0 MByte/sec, offset 15
  Transinfo settings: current(12/15/0/0), goal(12/15/0/0), user(12/15/0/0)
  Total transfers 0 (0 reads and 0 writes)
             < 2K      2K+     4K+     8K+    16K+    32K+    64K+   128K+
   Reads:       0       0       0       0       0       0       0       0
  Writes:       0       0       0       0       0       0       0       0

  Device using Narrow/Sync transfers at 10.0 MByte/sec, offset 15
  Transinfo settings: current(25/15/0/0), goal(12/15/0/0), user(12/15/0/0)
  Total transfers 132 (0 reads and 132 writes)
             < 2K      2K+     4K+     8K+    16K+    32K+    64K+   128K+
   Reads:       0       0       0       0       0       0       0       0
  Writes:       0       0       0       1     131       0       0       0

This output reveals the transfer speed to the various SCSI devices connected to the controller based on channel ID, as well as detailed statistics concerning the amount and sizes of files read or written by that device. For example, this controller is communicating with the CD-ROM at 20 megabytes per second, while the tape drive is only communicating at 10 megabytes per second.

5.3.9. /proc/sys/

The /proc/sys/ directory is different from others in /proc/ because it not only provides information about the system but also allows the system administrator to immediately enable and disable kernel features.


Use caution when changing settings on a production system using the various files in the /proc/sys/ directory. Changing the wrong setting may render the kernel unstable, requiring a system reboot.

For this reason, be sure the options are valid for that file before attempting to change any value in /proc/sys/.

A good way to determine if a particular file can be configured, or if it is only designed to provide information, is to list it with the -l option at the shell prompt. If the file is writable, it may be used to configure the kernel. For example, a partial listing of /proc/sys/fs looks like this:

-r--r--r--    1 root     root            0 May 10 16:14 dentry-state
-rw-r--r--    1 root     root            0 May 10 16:14 dir-notify-enable
-r--r--r--    1 root     root            0 May 10 16:14 dquot-nr
-rw-r--r--    1 root     root            0 May 10 16:14 file-max
-r--r--r--    1 root     root            0 May 10 16:14 file-nr

In this listing, the files dir-notify-enable and file-max can be written to and, therefore, can be used to configure the kernel. The other files only provide feedback on current settings.

Changing a value within a /proc/sys/ file is done by echoing the new value into the file. For example, to enable the System Request Key on a running kernel, type the command:

echo 1 > /proc/sys/kernel/sysrq

This will change the value for sysrq from 0 (off) to 1 (on).

The purpose of the System Request Key is to allow immediate input to the kernel through simple key combinations. For example, the System Request Key can be used to immediately shut down or restart a system, sync all mounted file systems, or dump important information to your console. This feature is most useful when using a development kernel or when experiencing system freezes. However, it is considered a security risk for an unattended console and is therefore turned off by default under Red Hat Linux.

Refer to /usr/src/linux-2.4/Documentation/sysrq.txt for more information on the System Request Key.

A few /proc/sys/ configuration files contain more than one value. In order to correctly send new values to them, place a space character between each value passed with the echo command, such as is done in this example:

echo 4 2 45 > /proc/sys/kernel/acct


Any configuration changes made using the echo command will disappear when the system is restarted. To make configuration changes take effect after the system is rebooted, see Section 5.4 Using the sysctl Command.

The /proc/sys/ directory contains several subdirectories controlling different aspects of a running kernel. /proc/sys/dev/

This directory provides parameters for particular devices on the system. Most systems have at least two directories, cdrom and raid. Customized kernels can have other directories, such as parport, which provides the ability to share one parallel port between multiple device drivers.

The cdrom directory contains a file called info, which reveals a number of important CD-ROM parameters:

CD-ROM information, Id: cdrom.c 3.12 2000/10/18

drive name:		hdc
drive speed:		32
drive # of slots:	1
Can close tray:		1
Can open tray:		1
Can lock tray:		1
Can change speed:	1
Can select disk:	0
Can read multisession:	1
Can read MCN:		1
Reports media changed:	1
Can play audio:		1
Can write CD-R:		0
Can write CD-RW:	0
Can read DVD:		0
Can write DVD-R:	0
Can write DVD-RAM:	0

This file can be quickly scanned to discover the qualities of an unknown CD-ROM. If multiple CD-ROMs are available on a system, each device is given its own column of information.

Various files in /proc/sys/dev/cdrom, such as autoclose and checkmedia, can be used to control the system's CD-ROM. Use the echo command to enable or disable these features.

If RAID support is compiled into the kernel, a /proc/sys/dev/raid/ directory will be available with at least two files in it: speed_limit_min and speed_limit_max. These settings determine the acceleration of RAID devices for I/O intensive tasks, such as resyncing the disks. /proc/sys/fs/

This directory contains an array of options and information concerning various aspects of the file system, including quota, file handle, inode, and dentry information.

The binfmt_misc directory is used to provide kernel support for miscellaneous binary formats.

The important files in /proc/sys/fs include:

  • dentry-state — Provides the status of the directory cache. The file looks similar to this:

    57411	52939	45	0	0	0

    The first number reveals the total number of directory cache entries, while the second number displays the number of unused entries. The third number tells the number of seconds between when a directory has been freed and when it can be reclaimed, and the fourth measures the pages currently requested by the system. The last two numbers are not used and display only zeros.

  • dquot-nr — Shows the maximum number of cached disk quota entries.

  • file-max — Change the maximum number of file handles that the kernel will allocate. Raising the value in this file can resolve errors caused by a lack of available file handles.

  • file-nr — Displays the number of allocated file handles, used file handles, and the maximum number of file handles.

  • overflowgid and overflowuid — Defines the fixed group ID and user ID, respectively, for use with file systems that only support 16-bit group and user IDs.

  • super-max — Controls the maximum number of superblocks available.

  • super-nr — Displays the current number of superblocks in use. /proc/sys/kernel/

This directory contains a variety of different configuration files that directly affect the operation of the kernel. Some of the most important files include:

  • acct — Controls the suspension of process accounting based on the percentage of free space available on the file system containing the log. By default, the file looks like this:

    4	2	30

    The second value sets the threshold percentage of free space when logging will be suspended, while the first value dictates the percentage of free space required for logging to resume. The third value sets the interval, in seconds, that the kernel polls the file system to see if logging should be suspended or resumed.

  • cap-bound — Controls the capability bounding settings, which provides a list of capabilities for any process on the system. If a capability is not listed here, then no process, no matter how privileged, can do it. The idea is to make the system more secure by ensuring that certain things cannot happen, at least beyond a certain point in the boot process.

    For a valid list of values for this virtual file, consult /usr/src/linux-2.4/include/linux/capability.h. More information on capability bounding is available online at the following URL: http://lwn.net/1999/1202/kernel.php3.

  • ctrl-alt-del — Controls whether [Ctrl]-[Alt]-[Delete] will gracefully restart the computer using init (value 0) or force an immediate reboot without syncing the dirty buffers to disk (value 1).

  • domainname — Configures the system domain name, such as example.com.

  • hostname — Configures the system hostname, such as www.example.com.

  • hotplug — Configures the utility to be used when a configuration change is detected by the system. This is primarily used with USB and Cardbus PCI. The default value of /sbin/hotplug should not be changed unless you are testing a new program to fulfill this role.

  • modprobe — Sets the location of the program to be used to load kernel modules when necessary. The default value of /sbin/modprobe signifies that kmod will call it to actually load the module when a kernel thread calls kmod.

  • msgmax — Sets the maximum size of any message sent from one process to another and is set to 8192 bytes by default. You should be careful about raising this value, as queued messages between processes are stored in non-swappable kernel memory. Any increase in msgmax would increase RAM requirements for the system.

  • msgmnb — Sets the maximum number of bytes in a single message queue. The default is 16384.

  • msgmni — Sets the maximum number of message queue identifiers. The default is 16.

  • osrelease — Lists the Linux kernel release number. This file can only be altered by changing the kernel source and recompiling.

  • ostype — Displays the type of operating system. By default, this file is set to Linux, and this value can only be changed by changing the kernel source and recompiling.

  • overflowgid and overflowuid — Defines the fixed group ID and user ID, respectively, for use with system calls on architectures that only support 16-bit group and user IDs.

  • panic — Defines the number of seconds the kernel will postpone rebooting when the system experiences a kernel panic. By default, the value is set to 0, which disables automatic rebooting after a panic.

  • printk — This file controls a variety of settings related to printing or logging error messages. Each error message reported by the kernel has a loglevel associated with it that defines the importance of the message. The loglevel values break down in this order:

    • 0 — Kernel emergency. The system is unusable.

    • 1 — Kernel alert. Action must be taken immediately.

    • 2 — Condition of the kernel is considered critical.

    • 3 — General kernel error condition.

    • 4 — General kernel warning condition.

    • 5 — Kernel notice of a normal but significant condition.

    • 6 — Kernel informational message.

    • 7 — Kernel debug-level messages.

    Four values are found in the printk file:

    6	4	1	7

    Each of these values defines a different rule for dealing with error messages. The first value, called the console loglevel, defines the lowest priority of messages that will be printed to the console. (Note that, the lower the priority, the higher the loglevel number.) The second value sets the default loglevel for messages without an explicit loglevel attached to them. The third value sets the lowest possible loglevel configuration for the console loglevel. The last value sets the default value for the console loglevel.

  • rtsig-max — Configures the maximum number of POSIX realtime signals that the system may have queued at any one time. The default value is 1024.

  • rtsig-nr — The current number of POSIX realtime signals queued by the kernel.

  • sem — Configures semaphore settings within the kernel. A semaphore is a System V IPC object that is used to control utilization of a particular process.

  • shmall — Sets the total amount of shared memory that can be used at one time on the system, in bytes. By default, this value is 2097152.

  • shmmax — Sets the largest shared memory segment size allowed by the kernel, in bytes. By default, this value is 33554432. However, the kernel supports much larger values than this.

  • shmmni — Sets the maximum number of shared memory segments for the whole system, in bytes. By default, this value is 4096

  • sysrq — Activates the System Request Key, if this value is set to anything other than the default of 0. See Section 5.3.9 /proc/sys/ for details about the System Request Key.

  • threads-max — Sets the maximum number of threads to be used by the kernel, with a default value of 2048.

  • version — Displays the date and time the kernel was last compiled. The first field in this file, such as #3, relates to the number of times a kernel was built from the source base.

The random directory stores a number of values related to generating random numbers for the kernel. /proc/sys/net/

This directory contains subdirectories concerning various networking topics. Various configurations at the time of kernel compilation make different directories available here, such as appletalk, ethernet, ipv4, ipx, and ipv6. Within these directories, system administrators are able to adjust the network configuration on a running system.

Given the wide variety of possible networking options available with Linux, only the most common /proc/sys/net/ directories will be discussed.

The /proc/sys/net/core/ directory contains a variety of settings that control the interaction between the kernel and networking layers. The most important of these files are:

  • message_burst — The amount of time in tenths of a second required to write a new warning message. This is used to prevent Denial of Service (DoS) attacks. The default setting is 50.

  • message_cost — Also used to prevent DoS attacks by placing a cost on every warning message. The higher the value of this file (default of 5), the more likely the warning message will be ignored.

    The idea of a DoS attack is to bombard the targeted system with requests that generate errors and fill up disk partitions with log files or require all of the system's resources to handle the error logging. The settings in message_burst and message_cost are designed to be modified based on the system's acceptable risk versus the need for comprehensive logging.

  • netdev_max_backlog — Sets the maximum number of packets allowed to queue when a particular interface receives packets faster than the kernel can process them. The default value for this file is 300.

  • optmem_max — Configures the maximum ancillary buffer size allowed per socket.

  • rmem_default — Sets the receive socket buffer default size in bytes.

  • rmem_max — Sets the receive socket buffer maximum size in bytes.

  • wmem_default — Sets the send socket buffer default size in bytes.

  • wmem_max — Sets the send socket buffer maximum size in bytes.

The /proc/sys/net/ipv4/ directory contains additional networking settings. Many of these settings, used in conjunction with one another, are very useful in preventing attacks on the system or using the system to act as a router.


An erroneous change to these files may affect remote connectivity to the system.

Here are some of the most important files in the /proc/sys/net/ipv4/ directory:

  • icmp_destunreach_rate, icmp_echoreply_rate, icmp_paramprob_rate and icmp_timeexeed_rate — Set the maximum ICMP send packet rate, in 1/100 of a second, to hosts under certain conditions. A setting of 0 removes any delay and is not a good idea.

  • icmp_echo_ignore_all and icmp_echo_ignore_broadcasts — Allows the kernel to ignore ICMP ECHO packets from every host or only those originating from broadcast and multicast addresses, respectively. A value of 0 allows the kernel to respond, while a value of 1 ignores the packets.

  • ip_default_ttl — Sets the default Time To Live (TTL), which limits the number of hops a packet may make before reaching its destination. Increasing this value can diminish system performance.

  • ip_forward — Permits interfaces on the system to forward packets to one other. By default, this file is set to 0. Setting this file to 1 enables network packet forwarding.

  • ip_local_port_range — Specifies the range of ports to be used by TCP or UDP when a local port is needed. The first number is the lowest port to be used and the second number specifies the highest port. Any systems that expect to require more ports than the default 1024 to 4999 should use the 32768 to 61000 range in this file.

  • tcp_syn_retries — Provides a limit on the number of times the system will re-transmit a SYN packet when attempting to make a connection.

  • tcp_retries1 — Sets the number of permitted re-transmissions attempting to answer an incoming connection. Default of 3.

  • tcp_retries2 — Sets the number of permitted re-transmissions of TCP packets. Default of 15.

The /usr/src/linux-2.4/Documentation/networking/ip-sysctl.txt file contains a complete list of files and options available in the /proc/sys/net/ipv4/ directory.

A number of other directories exist within the /proc/sys/net/ipv4/ directory and each covers specific topics. The /proc/sys/net/ipv4/conf/ directory allows each system interface to be configured in different ways, including the use of default settings for unconfigured devices (in the /proc/sys/net/ipv4/conf/default/ subdirectory) and settings that override all special configurations (in the /proc/sys/net/ipv4/conf/all/ subdirectory).

The /proc/sys/net/ipv4/neigh/ directory contains settings for communicating with a host directly connected to the system (called a network neighbor) and also contains different settings for systems more than one hop away.

Routing over IPV4 also has its own directory, /proc/sys/net/ipv4/route/. Unlike conf/ and neigh/, the /proc/sys/net/ipv4/route/ directory contains specifications that apply to routing with any interfaces on the system. Many of these settings, such as max_size, max_delay, and min_delay, relate to controlling the size of the routing cache. To clear the routing cache, write any value to the flush file.

Additional information about these directories and the possible values for their configuration files can be found in /usr/src/linux-2.4/Documentation/filesystems/proc.txt. /proc/sys/vm/

This directory facilitates the configuration of the Linux kernel's virtual memory (VM) subsystem. The kernel makes extensive and intelligent use of virtual memory, which is commonly called swap space.

The following files are commonly found in the /proc/sys/vm/ directory:

  • bdflush — Sets various values related to the bdflush kernel daemon.

  • buffermem — Allows you to control the percentage amount of total system memory to be used for buffer memory. Typical output for this file looks like this:

    2       10       60

    The first and last values set the minimum and maximum percentage of memory to be used as buffer memory, respectively. The middle value sets the percentage of system memory dedicated to buffer memory where the memory management subsystem will begin to clear buffer cache more than other kinds of memory to compensate for a general lack of free memory.

  • kswapd — Sets various values concerned with the kernel swap-out daemon, kswapd. This file has three values:

    512	32	8

    The first value sets the maximum number of pages that kswapd will attempt to free in a single attempt. The larger this number, the more aggressively the kernel can move to free pages. The second value sets the minimum number of times that kswapd attempts to free a page. The third value sets the number of pages kswapd attempts to write in a single attempt. Proper tuning of this final value can improve performance on a system using a lot of swap space by telling the kernel to write pages in large chunks, minimizing the number of disk seeks.

  • max_map_count — Configures the maximum number of memory map areas a process may have. In most cases, the default value of 65536 is appropriate.

  • overcommit_memory — When set to the default value of 0 the kernel estimates the amount of memory available and fails requests that are blatantly invalid. Unfortunately, since memory is allocated using a heuristic rather than a precise algorithm, it can sometimes overload the system.

    If overcommit_memory is set to 1, then the potential for system overload is increased, but so is the performance for memory intensive tasks, such as those used by some scientific software.

    For those who desire less risk of over memory commitment, the following two options have been added. Setting overcommit_memory to 2 fails if a memory request adds up to more that half of the physical RAM, plus swap. Setting it to 3 fails if a memory request adds up to more than swap alone can hold.

  • pagecache — Controls the amount of memory used by the page cache. The values in pagecache are percentages, and they work in a similar way as buffermem to enforce minimums and maximums of available page cache memory.

  • page-cluster — Sets the number of pages read in a single attempt. The default value of 4, which actually relates to 16 pages, is appropriate for most systems.

  • pagetable_cache — Controls the number of page tables that are cached on a per-processor basis. The first and second values relate to the minimum and maximum number of page tables to set aside, respectively.

The /usr/src/linux-2.4/Documentation/sysctl/vm.txt file contains additional information on these various files.

5.3.10. /proc/sysvipc/

This directory contains information about System V IPC resources. The files in this directory relate to System V IPC calls for messages (msg), semaphores (sem), and shared memory (shm).

5.3.11. /proc/tty/

This directory contains information about the available and currently used tty devices on the system. Originally called teletype devices, any character-based data terminals are called tty devices.

In Linux, there are three different kinds of tty devices. Serial devices are used with serial connections, such as over a modem or using a serial cable. Virtual terminals create the common console connection, such as the virtual consoles available when pressing [Alt]-[<F-key>] at the system console. Pseudo terminals create a two-way communication that is used by some higher level applications, such as XFree86. The drivers file is a list of the current tty devices in use:

serial               /dev/cua        5  64-127 serial:callout
serial               /dev/ttyS       4  64-127 serial
pty_slave            /dev/pts      136   0-255 pty:slave
pty_master           /dev/ptm      128   0-255 pty:master
pty_slave            /dev/ttyp       3   0-255 pty:slave
pty_master           /dev/pty        2   0-255 pty:master
/dev/vc/0            /dev/vc/0       4       0 system:vtmaster
/dev/ptmx            /dev/ptmx       5       2 system
/dev/console         /dev/console    5       1 system:console
/dev/tty             /dev/tty        5       0 system:/dev/tty
unknown              /dev/vc/%d      4    1-63 console

The /proc/tty/driver/serial file lists the usage statistics and status of each of the serial tty lines.

In order that tty devices can be used in a similar way as network devices, the Linux kernel will enforce line discipline on the device. This allows the driver to place a specific type of header with every block of data transmitted over the device, making it possible for the remote end of the connection to see a block of data as just one in a stream of data blocks. SLIP and PPP are common line disciplines, and each are commonly used to connect systems to one other over a serial link.

Registered line disciplines are stored in the ldiscs file, with detailed information available in the ldisc directory.