This chapter describes the installation and customization of FFTW, the latest version of which may be downloaded from the FFTW home page.
As distributed, FFTW makes very few assumptions about your system. All
you need is an ANSI C compiler (
gcc is fine, although
vendor-provided compilers often produce faster code).
However, installation of FFTW is somewhat simpler if you have a Unix or
a GNU system, such as Linux. In this chapter, we first describe the
installation of FFTW on Unix and non-Unix systems. We then describe how
you can customize FFTW to achieve better performance. Specifically, you
can I) enable
gcc/x86-specific hacks that improve performance on
Pentia and PentiumPro's; II) adapt FFTW to use the high-resolution clock
of your machine, if any; III) produce code (codelets) to support
fast transforms of sizes that are not supported efficiently by the
standard FFTW distribution.
FFTW comes with a
configure program in the GNU style.
Installation can be as simple as:
./configure make make install
This will build the uniprocessor complex and real transform libraries
along with the test programs. We strongly recommend that you use GNU
make if it is available; on some systems it is called
gmake. The "
make install" command installs the fftw and
rfftw libraries in standard places, and typically requires root
privileges (unless you specify a different install directory with the
--prefix flag to
configure). You can also type
make check" to put the FFTW test programs through their paces.
If you have problems during configuration or compilation, you may want
to run "
make distclean" before trying again; this ensures that
you don't have any stale files left over from previous compilation
configure script knows good
CFLAGS (C compiler flags)
for a few systems. If your system is not known, the
script will print out a warning. (9) In this case, you can compile
FFTW with the command
make CFLAGS="<write your CFLAGS here>"
If you do find an optimal set of
CFLAGS for your system, please
let us know what they are (along with the output of
so that we can include them in future releases.
configure program supports all the standard flags defined by
the GNU Coding Standards; see the
INSTALL file in FFTW or
the GNU web page.
--help to list all flags and
--enable-shared to create shared, rather than static, libraries.
configure also accepts a few FFTW-specific flags, particularly:
--enable-float Produces a single-precision version of FFTW
float) instead of the default double-precision (
See Section Installing FFTW in both single and double precision.
--enable-type-prefix Adds a `d' or `s' prefix to all
installed libraries and header files to indicate the floating-point
precision. See Section Installing FFTW in both single and double precision. (
--enable-type-prefix=<prefix> lets you add an
arbitrary prefix.) By default, no prefix is used.
--enable-threads Enables compilation and installation of the FFTW
threads library (see Section Multi-threaded FFTW), which provides a
simple interface to parallel transforms for SMP systems. (By default,
the threads routines are not compiled.)
In conjunction with
--enable-threads, causes the multi-threaded
FFTW library to use OpenMP or SGI MP compiler directives in order to
induce parallelism, rather than spawning its own threads directly.
(Useful especially for programs already employing such directives, in
order to minimize conflicts between different parallelization
--enable-mpi Enables compilation and installation of the FFTW MPI
library (see Section MPI FFTW), which provides parallel transforms for
distributed-memory systems with MPI. (By default, the MPI routines are
--disable-fortran Disables inclusion of Fortran-callable wrapper
routines (see Section Calling FFTW from Fortran) in the standard FFTW
libraries. These wrapper routines increase the library size by only a
negligible amount, so they are included by default as long as the
configure script finds a Fortran compiler on your system.
--with-gcc Enables the use of
gcc. By default, FFTW uses
cc compiler if present. Unfortunately,
gcc produces slower code than
cc on many systems.
--enable-i386-hacks See Section
gcc and Pentium hacks, below.
--enable-pentium-timer See Section
gcc and Pentium hacks, below.
configure to use a particular C compiler (instead of the
cc), set the environment variable
the name of the desired compiler before running
may also need to set the flags via the variable
It is quite straightforward to install FFTW even on non-Unix systems
lacking the niceties of the
configure script. The FFTW Home Page
may include some FFTW packages preconfigured for particular
systems/compilers, and also contains installation notes sent in by
users. All you really need to do, though, is to compile all of the
.c files in the appropriate directories of the FFTW package.
(You needn't worry about the many extraneous files lying around.)
For the complex transforms, compile all of the
.c files in the
fftw directory and link them into a library. Similarly, for the
real transforms, compile all of the
.c files in the
directory into a library. Note that these sources
various files in the
rfftw directories, so you
may need to set up the
#include paths for your compiler
appropriately. Be sure to enable the highest-possible level of
optimization in your compiler.
By default, FFTW is compiled for double-precision transforms. To work
in single precision rather than double precision,
fftw.h (in the
directory) and (re)compile FFTW.
These libraries should be linked with any program that uses the
corresponding transforms. The required header files,
rfftw.h, are located in the
directories respectively; you may want to put them with the libraries,
or wherever header files normally go on your system.
FFTW includes test programs,
tests directory. These are compiled and linked like any
program using FFTW, except that they use additional header files located
rfftw directories, so you will need to set
#include paths appropriately.
rfftw_test is compiled from
test_main.c. When you run these programs, you will be prompted
interactively for various possible tests to perform; see also
tests/README for more information.
It is often useful to install both single- and double-precision versions of the FFTW libraries on the same machine, and we provide a convenient mechanism for achieving this on Unix systems.
--enable-type-prefix option of configure is used, the
FFTW libraries and header files are installed with a prefix of `d'
or `s', depending upon whether you compiled in double or single
precision. Then, instead of linking your program with
-lfftw, for example, you would link with
-ldrfftw -ldfftw to use
the double-precision version or with
-lsrfftw -lsfftw to use the
single-precision version. Also, you would
<srfftw.h> instead of
The names of FFTW functions, data types, and constants remain
unchanged! You still call, for instance,
fftw_one and not
dfftw_one. Only the names of header files and libraries are
modified. One consequence of this is that you cannot use both
the single- and double-precision FFTW libraries in the same program,
simultaneously, as the function names would conflict.
So, to install both the single- and double-precision libraries on the same machine, you would do:
./configure --enable-type-prefix [ other options ] make make install make clean ./configure --enable-float --enable-type-prefix [ other options ] make make install
gcc and Pentium hacks
--enable-i386-hacks enables specific
optimizations for the Pentium and later x86 CPUs under gcc, which can
significantly improve performance of double-precision transforms.
Specifically, we have tested these hacks on Linux with
and versions of
egcs since 1.0.3. These optimizations affect
only the performance and not the correctness of FFTW (i.e. it is always
safe to try them out).
These hacks provide a workaround to the incorrect alignment of local
double variables in
compiler aligns these
variables to multiples of 4 bytes, but execution is much faster (on
Pentium and PentiumPro) if
doubles are aligned to a multiple of 8
bytes. By carefully counting the number of variables allocated by the
compiler in performance-critical regions of the code, we have been able
to introduce dummy allocations (using
alloca) that align the
stack properly. The hack depends crucially on the compiler flags that
are used. For example, it won't work without
In principle, these hacks are no longer required under
versions 2.95 and later, which automatically align the stack correctly
-mpreferred-stack-boundary in the
However, we have encountered a
the stack alignment of versions 2.95. that causes FFTW's stack to
be misaligned under some circumstances. The
automatically detects this bug and disables
gcc's stack alignment
in favor of our own hacks when
--enable-i386-hacks is used.
fftw_test program outputs speed measurements that you can use
to see if these hacks are beneficial.
--enable-pentium-timer enables the
use of the Pentium and PentiumPro cycle counter for timing purposes. In
order to get correct results, you must define
fftw/config.h to be the clock speed of your processor; the
resulting FFTW library will be nonportable. The use of this option is
deprecated. On serious operating systems (such as Linux), FFTW uses
gettimeofday(), which has enough resolution and is portable.
(Note that Win32 has its own high-resolution timing routines as well.
FFTW contains unsupported code to use these routines.)
FFTW needs a reasonably-precise clock in order to find the optimal way
to compute a transform. On Unix systems,
configure looks for
gettimeofday and other system-specific timers. If it does not
find any high resolution clock, it defaults to using the
function, which is very portable, but forces FFTW to run for a long time
in order to get reliable measurements.
If your machine supports a high-resolution clock not recognized by FFTW,
it is therefore advisable to use it. You must edit
fftw/fftw-int.h. There are a few macros you must redefine. The
code is documented and should be self-explanatory. (By the way,
fftw-int stands for
fftw-internal, but for some
inexplicable reason people are still using primitive systems with 8.3
Even if you don't install high-resolution timing code, we still
recommend that you look at the
FFTW_TIME_MIN constant in
fftw/fftw-int.h. This constant holds the minimum time interval (in
seconds) required to get accurate timing measurements, and should be (at
least) several hundred times the resolution of your clock. The default
constants are on the conservative side, and may cause FFTW to take
longer than necessary when you create a plan. Set
to whatever is appropriate on your system (be sure to set the
FFTW_TIME_MIN...there are several definitions in
fftw-int.h, corresponding to different platforms and timers).
As an aid in checking the resolution of your clock, you can use the
tests/fftw_test program with the
tests/README). Remember, the mere fact that your clock
reports times in, say, picoseconds, does not mean that it is actually
accurate to that resolution.
If you know that you will only use transforms of a certain size (say,
powers of 2) and want to reduce the size of the library, you can
reconfigure FFTW to support only those sizes you are interested in. You
may even generate code to enable efficient transforms of a size not
supported by the default distribution. The default distribution
supports transforms of any size, but not all sizes are equally fast.
The default installation of FFTW is best at handling sizes of the form
2a 3b 5c 7d
where e+f is either 0 or
1, and the other exponents are arbitrary. Other sizes are
computed by means of a slow, general-purpose routine. However, if you
have an application that requires fast transforms of size, say,
17, there is a way to generate specialized code to handle that.
gensrc contains all the programs and scripts that
were used to generate FFTW. In particular, the program
gensrc/genfft.ml was used to generate the code that FFTW uses to
compute the transforms. We do not expect casual users to use it.
genfft is a rather sophisticated program that generates directed
acyclic graphs of FFT algorithms and performs algebraic simplifications
genfft is written in Objective Caml, a dialect of ML.
Objective Caml is described at http://pauillac.inria.fr/ocaml/
and can be downloaded from from ftp://ftp.inria.fr/lang/caml-light.
If you have Objective Caml installed, you can type
bootstrap.sh in the top-level directory to re-generate the files. If
you change the
gensrc/config file, you can optimize FFTW for
sizes that are not currently supported efficiently (say, 17 or 19).
We do not provide more details about the code-generation process, since we do not expect that users will need to generate their own code. However, feel free to contact us at email@example.com if you are interested in the subject.
You might find it interesting to learn Caml and/or some modern programming techniques that we used in the generator (including monadic programming), especially if you heard the rumor that Java and object-oriented programming are the latest advancement in the field. The internal operation of the codelet generator is described in the paper, "A Fast Fourier Transform Compiler," by M. Frigo, which is available from the FFTW home page and will appear in the Proceedings of the 1999 ACM SIGPLAN Conference on Programming Language Design and Implementation (PLDI).
Go to the first, previous, next, last section, table of contents.