CXML
        	    
LAPACK version 3.0
cgegs(3)

PURPOSE
  CGEGS - routine is deprecated and has been replaced by routine CGGES

SYNTAX
  SUBROUTINE CGEGS( JOBVSL, JOBVSR, N, A, LDA, B, LDB, ALPHA, BETA, VSL,
		    LDVSL, VSR, LDVSR, WORK, LWORK, RWORK, INFO )

      CHARACTER	    JOBVSL, JOBVSR

      INTEGER	    INFO, LDA, LDB, LDVSL, LDVSR, LWORK, N

      REAL	    RWORK( * )

      COMPLEX	    A( LDA, * ), ALPHA( * ), B( LDB, * ), BETA( * ), VSL(
		    LDVSL, * ), VSR( LDVSR, * ), WORK( * )

DESCRIPTION
  This routine is deprecated and has been replaced by routine CGGES.  CGEGS
  computes for a pair of N-by-N complex nonsymmetric matrices A, B:  the
  generalized eigenvalues (alpha, beta), the complex Schur form (A, B), and
  optionally left and/or right Schur vectors (VSL and VSR).

  (If only the generalized eigenvalues are needed, use the driver CGEGV
  instead.)

  A generalized eigenvalue for a pair of matrices (A,B) is, roughly speaking,
  a scalar w or a ratio	 alpha/beta = w, such that  A - w*B is singular.  It
  is usually represented as the pair (alpha,beta), as there is a reasonable
  interpretation for beta=0, and even for both being zero.  A good beginning
  reference is the book, "Matrix Computations", by G. Golub & C. van Loan
  (Johns Hopkins U. Press)

  The (generalized) Schur form of a pair of matrices is the result of
  multiplying both matrices on the left by one unitary matrix and both on the
  right by another unitary matrix, these two unitary matrices being chosen so
  as to bring the pair of matrices into upper triangular form with the
  diagonal elements of B being non-negative real numbers (this is also called
  complex Schur form.)

  The left and right Schur vectors are the columns of VSL and VSR,
  respectively, where VSL and VSR are the unitary matrices
  which reduce A and B to Schur form:

  Schur form of (A,B) = ( (VSL)**H A (VSR), (VSL)**H B (VSR) )

ARGUMENTS
  JOBVSL   (input) CHARACTER*1
	   = 'N':  do not compute the left Schur vectors;
	   = 'V':  compute the left Schur vectors.

  JOBVSR   (input) CHARACTER*1
	   = 'N':  do not compute the right Schur vectors;
	   = 'V':  compute the right Schur vectors.

  N	  (input) INTEGER
	  The order of the matrices A, B, VSL, and VSR.	 N >= 0.

  A	  (input/output) COMPLEX array, dimension (LDA, N)
	  On entry, the first of the pair of matrices whose generalized
	  eigenvalues and (optionally) Schur vectors are to be computed.  On
	  exit, the generalized Schur form of A.

  LDA	  (input) INTEGER
	  The leading dimension of A.  LDA >= max(1,N).

  B	  (input/output) COMPLEX array, dimension (LDB, N)
	  On entry, the second of the pair of matrices whose generalized
	  eigenvalues and (optionally) Schur vectors are to be computed.  On
	  exit, the generalized Schur form of B.

  LDB	  (input) INTEGER
	  The leading dimension of B.  LDB >= max(1,N).

  ALPHA	  (output) COMPLEX array, dimension (N)
	  BETA	  (output) COMPLEX array, dimension (N) On exit,
	  ALPHA(j)/BETA(j), j=1,...,N, will be the generalized eigenvalues.
	  ALPHA(j), j=1,...,N  and  BETA(j), j=1,...,N	are the diagonals of
	  the complex Schur form (A,B) output by CGEGS.	 The  BETA(j) will be
	  non-negative real.

	  Note: the quotients ALPHA(j)/BETA(j) may easily over- or underflow,
	  and BETA(j) may even be zero.	 Thus, the user should avoid naively
	  computing the ratio alpha/beta.  However, ALPHA will be always less
	  than and usually comparable with norm(A) in magnitude, and BETA
	  always less than and usually comparable with norm(B).

  VSL	  (output) COMPLEX array, dimension (LDVSL,N)
	  If JOBVSL = 'V', VSL will contain the left Schur vectors.  (See
	  "Purpose", above.) Not referenced if JOBVSL = 'N'.

  LDVSL	  (input) INTEGER
	  The leading dimension of the matrix VSL. LDVSL >= 1, and if JOBVSL
	  = 'V', LDVSL >= N.

  VSR	  (output) COMPLEX array, dimension (LDVSR,N)
	  If JOBVSR = 'V', VSR will contain the right Schur vectors.  (See
	  "Purpose", above.) Not referenced if JOBVSR = 'N'.

  LDVSR	  (input) INTEGER
	  The leading dimension of the matrix VSR. LDVSR >= 1, and if JOBVSR
	  = 'V', LDVSR >= N.

  WORK	  (workspace/output) COMPLEX array, dimension (LWORK)
	  On exit, if INFO = 0, WORK(1) returns the optimal LWORK.

  LWORK	  (input) INTEGER
	  The dimension of the array WORK.  LWORK >= max(1,2*N).  For good
	  performance, LWORK must generally be larger.	To compute the
	  optimal value of LWORK, call ILAENV to get blocksizes (for CGEQRF,
	  CUNMQR, and CUNGQR.)	Then compute: NB  -- MAX of the blocksizes
	  for CGEQRF, CUNMQR, and CUNGQR; the optimal LWORK is N*(NB+1).

	  If LWORK = -1, then a workspace query is assumed; the routine only
	  calculates the optimal size of the WORK array, returns this value
	  as the first entry of the WORK array, and no error message related
	  to LWORK is issued by XERBLA.

  RWORK	  (workspace) REAL array, dimension (3*N)

  INFO	  (output) INTEGER
	  = 0:	successful exit
	  < 0:	if INFO = -i, the i-th argument had an illegal value.
	  =1,...,N: The QZ iteration failed.  (A,B) are not in Schur form,
	  but ALPHA(j) and BETA(j) should be correct for j=INFO+1,...,N.  >
	  N:  errors that usually indicate LAPACK problems:
	  =N+1: error return from CGGBAL
	  =N+2: error return from CGEQRF
	  =N+3: error return from CUNMQR
	  =N+4: error return from CUNGQR
	  =N+5: error return from CGGHRD
	  =N+6: error return from CHGEQZ (other than failed iteration) =N+7:
	  error return from CGGBAK (computing VSL)
	  =N+8: error return from CGGBAK (computing VSR)
	  =N+9: error return from CLASCL (various places)