SLATEC Routines --- DDEABM ---


*DECK DDEABM
      SUBROUTINE DDEABM (DF, NEQ, T, Y, TOUT, INFO, RTOL, ATOL, IDID,
     +   RWORK, LRW, IWORK, LIW, RPAR, IPAR)
C***BEGIN PROLOGUE  DDEABM
C***PURPOSE  Solve an initial value problem in ordinary differential
C            equations using an Adams-Bashforth method.
C***LIBRARY   SLATEC (DEPAC)
C***CATEGORY  I1A1B
C***TYPE      DOUBLE PRECISION (DEABM-S, DDEABM-D)
C***KEYWORDS  ADAMS-BASHFORTH METHOD, DEPAC, INITIAL VALUE PROBLEMS,
C             ODE, ORDINARY DIFFERENTIAL EQUATIONS, PREDICTOR-CORRECTOR
C***AUTHOR  Shampine, L. F., (SNLA)
C           Watts, H. A., (SNLA)
C***DESCRIPTION
C
C   This is the Adams code in the package of differential equation
C   solvers DEPAC, consisting of the codes DDERKF, DDEABM, and DDEBDF.
C   Design of the package was by L. F. Shampine and H. A. Watts.
C   It is documented in
C        SAND79-2374 , DEPAC - Design of a User Oriented Package of ODE
C                              Solvers.
C   DDEABM is a driver for a modification of the code ODE written by
C             L. F. Shampine and M. K. Gordon
C             Sandia Laboratories
C             Albuquerque, New Mexico 87185
C
C **********************************************************************
C * ABSTRACT *
C ************
C
C   Subroutine DDEABM uses the Adams-Bashforth-Moulton
C   Predictor-Corrector formulas of orders one through twelve to
C   integrate a system of NEQ first order ordinary differential
C   equations of the form
C                         DU/DX = DF(X,U)
C   when the vector Y(*) of initial values for U(*) at X=T is given.
C   The subroutine integrates from T to TOUT. It is easy to continue the
C   integration to get results at additional TOUT.  This is the interval
C   mode of operation.  It is also easy for the routine to return with
C   the solution at each intermediate step on the way to TOUT.  This is
C   the intermediate-output mode of operation.
C
C   DDEABM uses subprograms DDES, DSTEPS, DINTP, DHSTRT, DHVNRM,
C   D1MACH, and the error handling routine XERMSG.  The only machine
C   dependent parameters to be assigned appear in D1MACH.
C
C **********************************************************************
C * Description of The Arguments To DDEABM (An Overview) *
C **********************************************************************
C
C   The Parameters are
C
C      DF -- This is the name of a subroutine which you provide to
C             define the differential equations.
C
C      NEQ -- This is the number of (first order) differential
C             equations to be integrated.
C
C      T -- This is a DOUBLE PRECISION value of the independent
C           variable.
C
C      Y(*) -- This DOUBLE PRECISION array contains the solution
C              components at T.
C
C      TOUT -- This is a DOUBLE PRECISION point at which a solution is
C              desired.
C
C      INFO(*) -- The basic task of the code is to integrate the
C             differential equations from T to TOUT and return an
C             answer at TOUT.  INFO(*) is an INTEGER array which is used
C             to communicate exactly how you want this task to be
C             carried out.
C
C      RTOL, ATOL -- These DOUBLE PRECISION quantities represent
C                    relative and absolute error tolerances which you
C                    provide to indicate how accurately you wish the
C                    solution to be computed.  You may choose them to be
C                    both scalars or else both vectors.
C
C      IDID -- This scalar quantity is an indicator reporting what
C             the code did.  You must monitor this INTEGER variable to
C             decide what action to take next.
C
C      RWORK(*), LRW -- RWORK(*) is a DOUBLE PRECISION work array of
C             length LRW which provides the code with needed storage
C             space.
C
C      IWORK(*), LIW -- IWORK(*) is an INTEGER work array of length LIW
C             which provides the code with needed storage space and an
C             across call flag.
C
C      RPAR, IPAR -- These are DOUBLE PRECISION and INTEGER parameter
C             arrays which you can use for communication between your
C             calling program and the DF subroutine.
C
C  Quantities which are used as input items are
C             NEQ, T, Y(*), TOUT, INFO(*),
C             RTOL, ATOL, RWORK(1), LRW and LIW.
C
C  Quantities which may be altered by the code are
C             T, Y(*), INFO(1), RTOL, ATOL,
C             IDID, RWORK(*) and IWORK(*).
C
C **********************************************************************
C * INPUT -- What To Do On The First Call To DDEABM *
C **********************************************************************
C
C   The first call of the code is defined to be the start of each new
C   problem.  Read through the descriptions of all the following items,
C   provide sufficient storage space for designated arrays, set
C   appropriate variables for the initialization of the problem, and
C   give information about how you want the problem to be solved.
C
C
C      DF -- Provide a subroutine of the form
C                               DF(X,U,UPRIME,RPAR,IPAR)
C             to define the system of first order differential equations
C             which is to be solved.  For the given values of X and the
C             vector  U(*)=(U(1),U(2),...,U(NEQ)) , the subroutine must
C             evaluate the NEQ components of the system of differential
C             equations  DU/DX=DF(X,U)  and store the derivatives in the
C             array UPRIME(*), that is,  UPRIME(I) = * DU(I)/DX *  for
C             equations I=1,...,NEQ.
C
C             Subroutine DF must NOT alter X or U(*).  You must declare
C             the name df in an external statement in your program that
C             calls DDEABM.  You must dimension U and UPRIME in DF.
C
C             RPAR and IPAR are DOUBLE PRECISION and INTEGER parameter
C             arrays which you can use for communication between your
C             calling program and subroutine DF. They are not used or
C             altered by DDEABM.  If you do not need RPAR or IPAR,
C             ignore these parameters by treating them as dummy
C             arguments. If you do choose to use them, dimension them in
C             your calling program and in DF as arrays of appropriate
C             length.
C
C      NEQ -- Set it to the number of differential equations.
C             (NEQ .GE. 1)
C
C      T -- Set it to the initial point of the integration.
C             You must use a program variable for T because the code
C             changes its value.
C
C      Y(*) -- Set this vector to the initial values of the NEQ solution
C             components at the initial point.  You must dimension Y at
C             least NEQ in your calling program.
C
C      TOUT -- Set it to the first point at which a solution
C             is desired.  You can take TOUT = T, in which case the code
C             will evaluate the derivative of the solution at T and
C             return. Integration either forward in T  (TOUT .GT. T)  or
C             backward in T  (TOUT .LT. T)  is permitted.
C
C             The code advances the solution from T to TOUT using
C             step sizes which are automatically selected so as to
C             achieve the desired accuracy.  If you wish, the code will
C             return with the solution and its derivative following
C             each intermediate step (intermediate-output mode) so that
C             you can monitor them, but you still must provide TOUT in
C             accord with the basic aim of the code.
C
C             The first step taken by the code is a critical one
C             because it must reflect how fast the solution changes near
C             the initial point.  The code automatically selects an
C             initial step size which is practically always suitable for
C             the problem. By using the fact that the code will not step
C             past TOUT in the first step, you could, if necessary,
C             restrict the length of the initial step size.
C
C             For some problems it may not be permissible to integrate
C             past a point TSTOP because a discontinuity occurs there
C             or the solution or its derivative is not defined beyond
C             TSTOP.  When you have declared a TSTOP point (see INFO(4)
C             and RWORK(1)), you have told the code not to integrate
C             past TSTOP.  In this case any TOUT beyond TSTOP is invalid
C             input.
C
C      INFO(*) -- Use the INFO array to give the code more details about
C             how you want your problem solved.  This array should be
C             dimensioned of length 15 to accommodate other members of
C             DEPAC or possible future extensions, though DDEABM uses
C             only the first four entries.  You must respond to all of
C             the following items which are arranged as questions.  The
C             simplest use of the code corresponds to answering all
C             questions as YES ,i.e. setting ALL entries of INFO to 0.
C
C        INFO(1) -- This parameter enables the code to initialize
C               itself.  You must set it to indicate the start of every
C               new problem.
C
C            **** Is this the first call for this problem ...
C                  YES -- set INFO(1) = 0
C                   NO -- not applicable here.
C                         See below for continuation calls.  ****
C
C        INFO(2) -- How much accuracy you want of your solution
C               is specified by the error tolerances RTOL and ATOL.
C               The simplest use is to take them both to be scalars.
C               To obtain more flexibility, they can both be vectors.
C               The code must be told your choice.
C
C            **** Are both error tolerances RTOL, ATOL scalars ...
C                  YES -- set INFO(2) = 0
C                         and input scalars for both RTOL and ATOL
C                   NO -- set INFO(2) = 1
C                         and input arrays for both RTOL and ATOL ****
C
C        INFO(3) -- The code integrates from T in the direction
C               of TOUT by steps.  If you wish, it will return the
C               computed solution and derivative at the next
C               intermediate step (the intermediate-output mode) or
C               TOUT, whichever comes first.  This is a good way to
C               proceed if you want to see the behavior of the solution.
C               If you must have solutions at a great many specific
C               TOUT points, this code will compute them efficiently.
C
C            **** Do you want the solution only at
C                 TOUT (and not at the next intermediate step) ...
C                  YES -- set INFO(3) = 0
C                   NO -- set INFO(3) = 1 ****
C
C        INFO(4) -- To handle solutions at a great many specific
C               values TOUT efficiently, this code may integrate past
C               TOUT and interpolate to obtain the result at TOUT.
C               Sometimes it is not possible to integrate beyond some
C               point TSTOP because the equation changes there or it is
C               not defined past TSTOP.  Then you must tell the code
C               not to go past.
C
C            **** Can the integration be carried out without any
C                 Restrictions on the independent variable T ...
C                  YES -- set INFO(4)=0
C                   NO -- set INFO(4)=1
C                         and define the stopping point TSTOP by
C                         setting RWORK(1)=TSTOP ****
C
C      RTOL, ATOL -- You must assign relative (RTOL) and absolute (ATOL)
C             error tolerances to tell the code how accurately you want
C             the solution to be computed.  They must be defined as
C             program variables because the code may change them.  You
C             have two choices --
C                  Both RTOL and ATOL are scalars. (INFO(2)=0)
C                  Both RTOL and ATOL are vectors. (INFO(2)=1)
C             In either case all components must be non-negative.
C
C             The tolerances are used by the code in a local error test
C             at each step which requires roughly that
C                     ABS(LOCAL ERROR) .LE. RTOL*ABS(Y)+ATOL
C             for each vector component.
C             (More specifically, a Euclidean norm is used to measure
C             the size of vectors, and the error test uses the magnitude
C             of the solution at the beginning of the step.)
C
C             The true (global) error is the difference between the true
C             solution of the initial value problem and the computed
C             approximation.  Practically all present day codes,
C             including this one, control the local error at each step
C             and do not even attempt to control the global error
C             directly.  Roughly speaking, they produce a solution Y(T)
C             which satisfies the differential equations with a
C             residual R(T),    DY(T)/DT = DF(T,Y(T)) + R(T)   ,
C             and, almost always, R(T) is bounded by the error
C             tolerances.  Usually, but not always, the true accuracy of
C             the computed Y is comparable to the error tolerances. This
C             code will usually, but not always, deliver a more accurate
C             solution if you reduce the tolerances and integrate again.
C             By comparing two such solutions you can get a fairly
C             reliable idea of the true error in the solution at the
C             bigger tolerances.
C
C             Setting ATOL=0.D0 results in a pure relative error test on
C             that component. Setting RTOL=0. results in a pure absolute
C             error test on that component.  A mixed test with non-zero
C             RTOL and ATOL corresponds roughly to a relative error
C             test when the solution component is much bigger than ATOL
C             and to an absolute error test when the solution component
C             is smaller than the threshold ATOL.
C
C             Proper selection of the absolute error control parameters
C             ATOL  requires you to have some idea of the scale of the
C             solution components.  To acquire this information may mean
C             that you will have to solve the problem more than once. In
C             the absence of scale information, you should ask for some
C             relative accuracy in all the components (by setting  RTOL
C             values non-zero) and perhaps impose extremely small
C             absolute error tolerances to protect against the danger of
C             a solution component becoming zero.
C
C             The code will not attempt to compute a solution at an
C             accuracy unreasonable for the machine being used.  It will
C             advise you if you ask for too much accuracy and inform
C             you as to the maximum accuracy it believes possible.
C
C      RWORK(*) -- Dimension this DOUBLE PRECISION work array of length
C             LRW in your calling program.
C
C      RWORK(1) -- If you have set INFO(4)=0, you can ignore this
C             optional input parameter.  Otherwise you must define a
C             stopping point TSTOP by setting   RWORK(1) = TSTOP.
C             (for some problems it may not be permissible to integrate
C             past a point TSTOP because a discontinuity occurs there
C             or the solution or its derivative is not defined beyond
C             TSTOP.)
C
C      LRW -- Set it to the declared length of the RWORK array.
C             You must have  LRW .GE. 130+21*NEQ
C
C      IWORK(*) -- Dimension this INTEGER work array of length LIW in
C             your calling program.
C
C      LIW -- Set it to the declared length of the IWORK array.
C             You must have  LIW .GE. 51
C
C      RPAR, IPAR -- These are parameter arrays, of DOUBLE PRECISION and
C             INTEGER type, respectively.  You can use them for
C             communication between your program that calls DDEABM and
C             the  DF subroutine.  They are not used or altered by
C             DDEABM.  If you do not need RPAR or IPAR, ignore these
C             parameters by treating them as dummy arguments.  If you do
C             choose to use them, dimension them in your calling program
C             and in DF as arrays of appropriate length.
C
C **********************************************************************
C * OUTPUT -- After Any Return From DDEABM *
C **********************************************************************
C
C   The principal aim of the code is to return a computed solution at
C   TOUT, although it is also possible to obtain intermediate results
C   along the way.  To find out whether the code achieved its goal
C   or if the integration process was interrupted before the task was
C   completed, you must check the IDID parameter.
C
C
C      T -- The solution was successfully advanced to the
C             output value of T.
C
C      Y(*) -- Contains the computed solution approximation at T.
C             You may also be interested in the approximate derivative
C             of the solution at T.  It is contained in
C             RWORK(21),...,RWORK(20+NEQ).
C
C      IDID -- Reports what the code did
C
C                         *** Task Completed ***
C                   Reported by positive values of IDID
C
C             IDID = 1 -- A step was successfully taken in the
C                       intermediate-output mode.  The code has not
C                       yet reached TOUT.
C
C             IDID = 2 -- The integration to TOUT was successfully
C                       completed (T=TOUT) by stepping exactly to TOUT.
C
C             IDID = 3 -- The integration to TOUT was successfully
C                       completed (T=TOUT) by stepping past TOUT.
C                       Y(*) is obtained by interpolation.
C
C                         *** Task Interrupted ***
C                   Reported by negative values of IDID
C
C             IDID = -1 -- A large amount of work has been expended.
C                       (500 steps attempted)
C
C             IDID = -2 -- The error tolerances are too stringent.
C
C             IDID = -3 -- The local error test cannot be satisfied
C                       because you specified a zero component in ATOL
C                       and the corresponding computed solution
C                       component is zero.  Thus, a pure relative error
C                       test is impossible for this component.
C
C             IDID = -4 -- The problem appears to be stiff.
C
C             IDID = -5,-6,-7,..,-32  -- Not applicable for this code
C                       but used by other members of DEPAC or possible
C                       future extensions.
C
C                         *** Task Terminated ***
C                   Reported by the value of IDID=-33
C
C             IDID = -33 -- The code has encountered trouble from which
C                       it cannot recover.  A message is printed
C                       explaining the trouble and control is returned
C                       to the calling program. For example, this occurs
C                       when invalid input is detected.
C
C      RTOL, ATOL -- These quantities remain unchanged except when
C             IDID = -2.  In this case, the error tolerances have been
C             increased by the code to values which are estimated to be
C             appropriate for continuing the integration.  However, the
C             reported solution at T was obtained using the input values
C             of RTOL and ATOL.
C
C      RWORK, IWORK -- Contain information which is usually of no
C             interest to the user but necessary for subsequent calls.
C             However, you may find use for
C
C             RWORK(11)--which contains the step size H to be
C                        attempted on the next step.
C
C             RWORK(12)--if the tolerances have been increased by the
C                        code (IDID = -2) , they were multiplied by the
C                        value in RWORK(12).
C
C             RWORK(13)--Which contains the current value of the
C                        independent variable, i.e. the farthest point
C                        integration has reached. This will be different
C                        from T only when interpolation has been
C                        performed (IDID=3).
C
C             RWORK(20+I)--Which contains the approximate derivative
C                        of the solution component Y(I).  In DDEABM, it
C                        is obtained by calling subroutine DF to
C                        evaluate the differential equation using T and
C                        Y(*) when IDID=1 or 2, and by interpolation
C                        when IDID=3.
C
C **********************************************************************
C * INPUT -- What To Do To Continue The Integration *
C *             (calls after the first)             *
C **********************************************************************
C
C        This code is organized so that subsequent calls to continue the
C        integration involve little (if any) additional effort on your
C        part. You must monitor the IDID parameter in order to determine
C        what to do next.
C
C        Recalling that the principal task of the code is to integrate
C        from T to TOUT (the interval mode), usually all you will need
C        to do is specify a new TOUT upon reaching the current TOUT.
C
C        Do not alter any quantity not specifically permitted below,
C        in particular do not alter NEQ, T, Y(*), RWORK(*), IWORK(*) or
C        the differential equation in subroutine DF. Any such alteration
C        constitutes a new problem and must be treated as such, i.e.
C        you must start afresh.
C
C        You cannot change from vector to scalar error control or vice
C        versa (INFO(2)) but you can change the size of the entries of
C        RTOL, ATOL.  Increasing a tolerance makes the equation easier
C        to integrate.  Decreasing a tolerance will make the equation
C        harder to integrate and should generally be avoided.
C
C        You can switch from the intermediate-output mode to the
C        interval mode (INFO(3)) or vice versa at any time.
C
C        If it has been necessary to prevent the integration from going
C        past a point TSTOP (INFO(4), RWORK(1)), keep in mind that the
C        code will not integrate to any TOUT beyond the currently
C        specified TSTOP.  Once TSTOP has been reached you must change
C        the value of TSTOP or set INFO(4)=0.  You may change INFO(4)
C        or TSTOP at any time but you must supply the value of TSTOP in
C        RWORK(1) whenever you set INFO(4)=1.
C
C        The parameter INFO(1) is used by the code to indicate the
C        beginning of a new problem and to indicate whether integration
C        is to be continued.  You must input the value  INFO(1) = 0
C        when starting a new problem.  You must input the value
C        INFO(1) = 1  if you wish to continue after an interrupted task.
C        Do not set  INFO(1) = 0  on a continuation call unless you
C        want the code to restart at the current T.
C
C                         *** Following A Completed Task ***
C         If
C             IDID = 1, call the code again to continue the integration
C                     another step in the direction of TOUT.
C
C             IDID = 2 or 3, define a new TOUT and call the code again.
C                     TOUT must be different from T. You cannot change
C                     the direction of integration without restarting.
C
C                         *** Following An Interrupted Task ***
C                     To show the code that you realize the task was
C                     interrupted and that you want to continue, you
C                     must take appropriate action and reset INFO(1) = 1
C         If
C             IDID = -1, the code has attempted 500 steps.
C                     If you want to continue, set INFO(1) = 1 and
C                     call the code again. An additional 500 steps
C                     will be allowed.
C
C             IDID = -2, the error tolerances RTOL, ATOL have been
C                     increased to values the code estimates appropriate
C                     for continuing.  You may want to change them
C                     yourself.  If you are sure you want to continue
C                     with relaxed error tolerances, set INFO(1)=1 and
C                     call the code again.
C
C             IDID = -3, a solution component is zero and you set the
C                     corresponding component of ATOL to zero.  If you
C                     are sure you want to continue, you must first
C                     alter the error criterion to use positive values
C                     for those components of ATOL corresponding to zero
C                     solution components, then set INFO(1)=1 and call
C                     the code again.
C
C             IDID = -4, the problem appears to be stiff.  It is very
C                     inefficient to solve such problems with DDEABM.
C                     The code DDEBDF in DEPAC handles this task
C                     efficiently.  If you are absolutely sure you want
C                     to continue with DDEABM, set INFO(1)=1 and call
C                     the code again.
C
C             IDID = -5,-6,-7,..,-32  --- cannot occur with this code
C                     but used by other members of DEPAC or possible
C                     future extensions.
C
C                         *** Following A Terminated Task ***
C         If
C             IDID = -33, you cannot continue the solution of this
C                     problem.  An attempt to do so will result in your
C                     run being terminated.
C
C **********************************************************************
C *Long Description:
C
C **********************************************************************
C *             DEPAC Package Overview           *
C **********************************************************************
C
C ....   You have a choice of three differential equation solvers from
C ....   DEPAC. The following brief descriptions are meant to aid you in
C ....   choosing the most appropriate code for your problem.
C
C ....   DDERKF is a fifth order Runge-Kutta code. It is the simplest of
C ....   the three choices, both algorithmically and in the use of the
C ....   code. DDERKF is primarily designed to solve non-stiff and
C ....   mildly stiff differential equations when derivative evaluations
C ....   are not expensive. It should generally not be used to get high
C ....   accuracy results nor answers at a great many specific points.
C ....   Because DDERKF has very low overhead costs, it will usually
C ....   result in the least expensive integration when solving
C ....   problems requiring a modest amount of accuracy and having
C ....   equations that are not costly to evaluate. DDERKF attempts to
C ....   discover when it is not suitable for the task posed.
C
C ....   DDEABM is a variable order (one through twelve) Adams code.
C ....   Its complexity lies somewhere between that of DDERKF and
C ....   DDEBDF.  DDEABM is primarily designed to solve non-stiff and
C ....   mildly stiff differential equations when derivative evaluations
C ....   are expensive, high accuracy results are needed or answers at
C ....   many specific points are required. DDEABM attempts to discover
C ....   when it is not suitable for the task posed.
C
C ....   DDEBDF is a variable order (one through five) backward
C ....   differentiation formula code. it is the most complicated of
C ....   the three choices. DDEBDF is primarily designed to solve stiff
C ....   differential equations at crude to moderate tolerances.
C ....   If the problem is very stiff at all, DDERKF and DDEABM will be
C ....   quite inefficient compared to DDEBDF. However, DDEBDF will be
C ....   inefficient compared to DDERKF and DDEABM on non-stiff problems
C ....   because it uses much more storage, has a much larger overhead,
C ....   and the low order formulas will not give high accuracies
C ....   efficiently.
C
C ....   The concept of stiffness cannot be described in a few words.
C ....   If you do not know the problem to be stiff, try either DDERKF
C ....   or DDEABM. Both of these codes will inform you of stiffness
C ....   when the cost of solving such problems becomes important.
C
C *********************************************************************
C
C***REFERENCES  L. F. Shampine and H. A. Watts, DEPAC - design of a user
C                 oriented package of ODE solvers, Report SAND79-2374,
C                 Sandia Laboratories, 1979.
C***ROUTINES CALLED  DDES, XERMSG
C***REVISION HISTORY  (YYMMDD)
C   820301  DATE WRITTEN
C   890531  Changed all specific intrinsics to generic.  (WRB)
C   890831  Modified array declarations.  (WRB)
C   891006  Cosmetic changes to prologue.  (WRB)
C   891024  Changed references from DVNORM to DHVNRM.  (WRB)
C   891024  REVISION DATE from Version 3.2
C   891214  Prologue converted to Version 4.0 format.  (BAB)
C   900510  Convert XERRWV calls to XERMSG calls.  (RWC)
C   920501  Reformatted the REFERENCES section.  (WRB)
C***END PROLOGUE  DDEABM