SLATEC Routines --- ISDCGN ---
*DECK ISDCGN
INTEGER FUNCTION ISDCGN (N, B, X, NELT, IA, JA, A, ISYM, MATVEC,
+ MTTVEC, MSOLVE, ITOL, TOL, ITMAX, ITER, ERR, IERR, IUNIT, R, Z,
+ P, ATP, ATZ, DZ, ATDZ, RWORK, IWORK, AK, BK, BNRM, SOLNRM)
C***BEGIN PROLOGUE ISDCGN
C***SUBSIDIARY
C***PURPOSE Preconditioned CG on Normal Equations Stop Test.
C This routine calculates the stop test for the Conjugate
C Gradient iteration scheme applied to the normal equations.
C It returns a non-zero if the error estimate (the type of
C which is determined by ITOL) is less than the user
C specified tolerance TOL.
C***LIBRARY SLATEC (SLAP)
C***CATEGORY D2A4, D2B4
C***TYPE DOUBLE PRECISION (ISSCGN-S, ISDCGN-D)
C***KEYWORDS ITERATIVE PRECONDITION, NON-SYMMETRIC LINEAR SYSTEM,
C NORMAL EQUATIONS, SLAP, SPARSE
C***AUTHOR Greenbaum, Anne, (Courant Institute)
C Seager, Mark K., (LLNL)
C Lawrence Livermore National Laboratory
C PO BOX 808, L-60
C Livermore, CA 94550 (510) 423-3141
C seager@llnl.gov
C***DESCRIPTION
C
C *Usage:
C INTEGER N, NELT, IA(NELT), JA(NELT), ISYM, ITOL, ITMAX, ITER
C INTEGER IERR, IUNIT, IWORK(USER DEFINED)
C DOUBLE PRECISION B(N), X(N), A(N), TOL, ERR, R(N), Z(N), P(N)
C DOUBLE PRECISION ATP(N), ATZ(N), DZ(N), ATDZ(N)
C DOUBLE PRECISION RWORK(USER DEFINED), AK, BK, BNRM, SOLNRM
C EXTERNAL MATVEC, MTTVEC, MSOLVE
C
C IF( ISTPCGN(N, B, X, NELT, IA, JA, A, ISYM, MATVEC, MTTVEC,
C $ MSOLVE, ITOL, TOL, ITMAX, ITER, ERR, IERR, IUNIT, R, Z, P,
C $ ATP, ATZ, DZ, ATDZ, RWORK, IWORK, AK, BK, BNRM, SOLNRM)
C $ .NE. 0 ) THEN ITERATION DONE
C
C *Arguments:
C N :IN Integer
C Order of the Matrix.
C B :IN Double Precision B(N).
C Right-hand side vector.
C X :IN Double Precision X(N).
C The current approximate solution vector.
C NELT :IN Integer.
C Number of Non-Zeros stored in A.
C IA :IN Integer IA(NELT).
C JA :IN Integer JA(NELT).
C A :IN Double Precision A(NELT).
C These arrays contain the matrix data structure for A.
C It could take any form. See "Description" in the
C DCGN routine.
C ISYM :IN Integer.
C Flag to indicate symmetric storage format.
C If ISYM=0, all non-zero entries of the matrix are stored.
C If ISYM=1, the matrix is symmetric, and only the upper
C or lower triangle of the matrix is stored.
C MATVEC :EXT External.
C Name of a routine which performs the matrix vector multiply
C Y = A*X given A and X. The name of the MATVEC routine must
C be declared external in the calling program. The calling
C sequence to MATVEC is:
C CALL MATVEC( N, X, Y, NELT, IA, JA, A, ISYM )
C Where N is the number of unknowns, Y is the product A*X
C upon return X is an input vector, NELT is the number of
C non-zeros in the SLAP-Column IA, JA, A storage for the matrix
C A. ISYM is a flag which, if non-zero, denotes that A is
C symmetric and only the lower or upper triangle is stored.
C MTTVEC :EXT External.
C Name of a routine which performs the matrix transpose vector
C multiply y = A'*X given A and X (where ' denotes transpose).
C The name of the MTTVEC routine must be declared external in
C the calling program. The calling sequence to MTTVEC is the
C same as that for MATVEC, viz.:
C CALL MTTVEC( N, X, Y, NELT, IA, JA, A, ISYM )
C Where N is the number of unknowns, Y is the product A'*X
C upon return X is an input vector, NELT is the number of
C non-zeros in the SLAP-Column IA, JA, A storage for the matrix
C A. ISYM is a flag which, if non-zero, denotes that A is
C symmetric and only the lower or upper triangle is stored.
C MSOLVE :EXT External.
C Name of a routine which solves a linear system MZ = R for
C Z given R with the preconditioning matrix M (M is supplied via
C RWORK and IWORK arrays). The name of the MSOLVE routine must
C be declared external in the calling program. The calling
C sequence to MSOLVE is:
C CALL MSOLVE(N, R, Z, NELT, IA, JA, A, ISYM, RWORK, IWORK)
C Where N is the number of unknowns, R is the right-hand side
C vector and Z is the solution upon return. NELT, IA, JA, A and
C ISYM are defined as above. RWORK is a double precision array
C that can be used to pass necessary preconditioning information
C and/or workspace to MSOLVE. IWORK is an integer work array
C for the same purpose as RWORK.
C ITOL :IN Integer.
C Flag to indicate type of convergence criterion.
C If ITOL=1, iteration stops when the 2-norm of the residual
C divided by the 2-norm of the right-hand side is less than TOL.
C If ITOL=2, iteration stops when the 2-norm of M-inv times the
C residual divided by the 2-norm of M-inv times the right hand
C side is less than TOL, where M-inv is the inverse of the
C diagonal of A.
C ITOL=11 is often useful for checking and comparing different
C routines. For this case, the user must supply the "exact"
C solution or a very accurate approximation (one with an error
C much less than TOL) through a common block,
C COMMON /DSLBLK/ SOLN( )
C If ITOL=11, iteration stops when the 2-norm of the difference
C between the iterative approximation and the user-supplied
C solution divided by the 2-norm of the user-supplied solution
C is less than TOL. Note that this requires the user to set up
C the "COMMON /DSLBLK/ SOLN(LENGTH)" in the calling routine.
C The routine with this declaration should be loaded before the
C stop test so that the correct length is used by the loader.
C This procedure is not standard Fortran and may not work
C correctly on your system (although it has worked on every
C system the authors have tried). If ITOL is not 11 then this
C common block is indeed standard Fortran.
C TOL :IN Double Precision.
C Convergence criterion, as described above.
C ITMAX :IN Integer.
C Maximum number of iterations.
C ITER :IN Integer.
C Current iteration count. (Must be zero on first call.)
C ERR :OUT Double Precision.
C Error estimate of error in the X(N) approximate solution, as
C defined by ITOL.
C IERR :OUT Integer.
C Error flag. IERR is set to 3 if ITOL is not one of the
C acceptable values, see above.
C IUNIT :IN Integer.
C Unit number on which to write the error at each iteration,
C if this is desired for monitoring convergence. If unit
C number is 0, no writing will occur.
C R :IN Double Precision R(N).
C The residual R = B-AX.
C Z :WORK Double Precision Z(N).
C Double Precision array used for workspace.
C P :IN Double Precision P(N).
C The conjugate direction vector.
C ATP :IN Double Precision ATP(N).
C A-transpose times the conjugate direction vector.
C ATZ :IN Double Precision ATZ(N).
C A-transpose times the pseudo-residual.
C DZ :IN Double Precision DZ(N).
C Workspace used to hold temporary vector(s).
C ATDZ :WORK Double Precision ATDZ(N).
C Workspace.
C RWORK :WORK Double Precision RWORK(USER DEFINED).
C Double Precision array that can be used by MSOLVE.
C IWORK :WORK Integer IWORK(USER DEFINED).
C Integer array that can be used by MSOLVE.
C AK :IN Double Precision.
C BK :IN Double Precision.
C Current conjugate gradient parameters alpha and beta.
C BNRM :INOUT Double Precision.
C Norm of the right hand side. Type of norm depends on ITOL.
C Calculated only on the first call.
C SOLNRM :INOUT Double Precision.
C 2-Norm of the true solution, SOLN. Only computed and used
C if ITOL = 11.
C
C *Function Return Values:
C 0 : Error estimate (determined by ITOL) is *NOT* less than the
C specified tolerance, TOL. The iteration must continue.
C 1 : Error estimate (determined by ITOL) is less than the
C specified tolerance, TOL. The iteration can be considered
C complete.
C
C *Cautions:
C This routine will attempt to write to the Fortran logical output
C unit IUNIT, if IUNIT .ne. 0. Thus, the user must make sure that
C this logical unit is attached to a file or terminal before calling
C this routine with a non-zero value for IUNIT. This routine does
C not check for the validity of a non-zero IUNIT unit number.
C
C***SEE ALSO DCGN
C***ROUTINES CALLED D1MACH, DNRM2
C***COMMON BLOCKS DSLBLK
C***REVISION HISTORY (YYMMDD)
C 890404 DATE WRITTEN
C 890404 Previous REVISION DATE
C 890915 Made changes requested at July 1989 CML Meeting. (MKS)
C 890922 Numerous changes to prologue to make closer to SLATEC
C standard. (FNF)
C 890929 Numerous changes to reduce SP/DP differences. (FNF)
C 891003 Removed C***REFER TO line, per MKS.
C 910411 Prologue converted to Version 4.0 format. (BAB)
C 910502 Removed MATVEC, MTTVEC and MSOLVE from ROUTINES CALLED
C list. (FNF)
C 910506 Made subsidiary to DCGN. (FNF)
C 920407 COMMON BLOCK renamed DSLBLK. (WRB)
C 920511 Added complete declaration section. (WRB)
C 920930 Corrected to not print AK,BK when ITER=0. (FNF)
C 921026 Changed 1.0E10 to D1MACH(2) and corrected D to E in
C output format. (FNF)
C 921113 Corrected C***CATEGORY line. (FNF)
C***END PROLOGUE ISDCGN